• Metal Finishing for San Jose, San Francisco, Silicon Valley and beyond.

  • Contact Us
Other Services

Other Services

Services offered to enhance applicable metal finishing processes include abrasive blasting, baking, and special inspection & testing to your requirements.

Abrasive Blasting produces a satin (matte) finish with no dimensional change of the blasted item. Blasting is performed to provide a non-reflective and cosmetically appealing surface quality. Further, minor imperfections such as machining lines and material grain can be made less apparent by diffusion of reflected light. Reflected light diffusion is critical in many law enforcement and military tactical, optical, medical/surgical, and laser applications. We offer two choices of blast media: glass bead or aluminum oxide.

We have two ovens to keep up with your demand for baking. Baking is utilized for different purposes, including embrittlement relief, adhesion and curing. Electroplating processes take place in an aqueous solution, and hydrogen gas is liberated at the cathode as the current flow supplies electrons to the hydrogen ions in solution. When hydrogen enters hardened steel, it can cause a loss of ductility, a loss of load carrying ability, and/or microscopic cracks and failures at applied stresses below the normal design strength of the steel. Steels that have been heat-treated to a hardness of Rockwell C31 or higher are at greatest risk of embrittlement. During pre-electroplating, the cleaning and certain pickling solutions are also apt to introduce hydrogen into the steel. The accepted method to alleviate hydrogen embrittlement is a process called relief baking or embrittlement relief baking. The process typically requires baking be done immediately after processing. Baking can also be used to accelerate cure of Teflon coatings and to cure some types of maskants. Adhesion baking can be used to improve adhesion of electroless nickel plated parts.

Get a Quote

Price Table

Maximum Size & Weight
Minimum Charge Height Width Front to Back Weight RoHS*

Abrasive Blast

Glass Bead or Aluminum Oxide

$75 20" 36" 20" 25 lbs Yes


$75 32" 38" 18" 50 lbs Yes

Special Inspection

Alodine Test
Passivate Test
Seal Test
Stain Resistance Test





Up to 100% Premium + Regular Price

Plating to Gage

Add 1/2 Minimum Lot for Affected Process


Same as Plating Charge for Process

Pick Up & Delivery

FREE within our service area

*About RoHS Compliance

Santa Clara Plating Co., Inc. is an RoHS-compliant facility. Processed parts will be RoHS-compliant unless otherwise noted in the Price Table. Explanation of the RoHS compliance notes in the Price Table follows:

  • "No" – Processed parts will not be RoHS compliant due to coating chemistry.
  • "Check" – Check with our Quality Department to determine if your part will be RoHS compliant. We will check for issues with solution entrapment and other design concerns. We can also help with your design to ensure RoHS compliance.
  • "Yes" – Your parts will be RoHS compliant.
  • We offer FREE pick up and delivery within our sales region

    We offer FREE pick up and delivery within our sales region 

  • Abrasive Blasting

    Abrasive Blasting 

  • Metal Finishing for San Jose, San Francisco, Silicon Valley and beyond.

  • Contact Us